[sd624]

just posted a new video machining a small part on the X7 and then measuring the part with a CMM. Includes video of the CMM and the print out of the results.

https://youtu.be/fQDWVgrF_8E


Sent from my iPad using Tapatalk Pro

[sportbob06]

Thanks again for another great video! May I make a suggestion/request for the next video..? If you are up to it, can you go over the machine maintenance and lubrication systems?

[sd624]

Thanks again for another great video! May I make a suggestion/request for the next video..? If you are up to it, can you go over the machine maintenance and lubrication systems?

No problem! I’ll add it to the list.


Sent from my iPad using Tapatalk Pro

[maker of things]

If you are taking requests I would be interested in seeing a walkthrough of getting chips out of the enclosure. washdown to the chip bin and removal of it. Too bad Syil didn't give you a deal on the machine to make content since you are one of few making content specifically about the machine.

[sd624]

If you are taking requests I would be interested in seeing a walkthrough of getting chips out of the enclosure. washdown to the chip bin and removal of it. Too bad Syil didn't give you a deal on the machine to make content since you are one of few making content specifically about the machine.

Sure I’ll take requests. My machine shipped without the wash down hose so I’m still waiting on it. Should have it shortly however. I’ll do a video on installing it and then clean the machine out when time permits.


Sent from my iPhone using Tapatalk

[syil]

Nice