584,812 active members*
5,435 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Surfcam > Surfcam heidenhain 530 postprocessor?
Results 1 to 5 of 5
  1. #1
    Join Date
    Sep 2021
    Posts
    3

    Surfcam heidenhain 530 postprocessor?

    Hi, does anyone have a postprocessor for surfcam heidenhain 530? Thank you

  2. #2
    Join Date
    Jan 2018
    Posts
    9

    Re: Surfcam heidenhain 530 postprocessor?

    Hi do you still need that PP?

  3. #3
    Join Date
    Sep 2021
    Posts
    3

    Re: Surfcam heidenhain 530 postprocessor?

    Hello,
    I already got both tnc530 and tnc426. But thanks !!

  4. #4
    Join Date
    Jul 2022
    Posts
    3

    Re: Surfcam heidenhain 530 postprocessor?

    Hello
    Can anyone please help with this. Modifying postform m Converting this G codes

    G83 X10. Y10. Z-10 R1. Q.8 F100.
    Y-10.
    X-10.
    Y10.

    to this code (heidenhain iso format)

    G83 X10. Y10 P01 1. P02 -10 P03 .8 P05 100.
    Y-10. G79
    X-10. G79
    Y10. G79

    Note: G79 is the call cycle for heidenhain control, it needs to be written in every location of drilling cycle so that the heidenhain will do the peck drilling otherwise if the control doesnt read the G79 it will only travel to does location w/o peck drilling.

    Thanks in advance

    Keep safe.

  5. #5
    Join Date
    Jul 2022
    Posts
    3

    Re: Surfcam heidenhain 530 postprocessor?

    Hello
    Can anyone please help with this. Modifying postform m Converting this G codes

    G83 X10. Y10. Z-10 R1. Q.8 F100.
    Y-10.
    X-10.
    Y10.

    to this code (heidenhain iso format)

    G83 X10. Y10 P01 1. P02 -10 P03 .8 P05 100.
    Y-10. G79
    X-10. G79
    Y10. G79

    Note: G79 is the call cycle for heidenhain control, it needs to be written in every location of drilling cycle so that the heidenhain will do the peck drilling otherwise if the control doesnt read the G79 it will only travel to does location w/o peck drilling.

    Thanks in advance

    Keep safe.

Similar Threads

  1. GibbsCAM 5 axis postprocessor for Heidenhain 530
    By FranKern in forum Post Processor Files
    Replies: 2
    Last Post: 11-12-2022, 02:06 PM
  2. Replies: 0
    Last Post: 12-30-2019, 08:21 AM
  3. heidenhain itnc 530 postprocessor!!
    By piziotizio in forum PowerMILL
    Replies: 0
    Last Post: 12-11-2012, 02:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •