Hello
Longtime reader of this forum but today i became a member =)
6 months ago I purchased an Emco pc mill 125, operated with fanuc 0-m, quite old and boring..
Got an idea that it might be possible to retrofit a new controller like axxb or uc300eth. With Uccnc or Mach4
x,y,z is driven by 130v servo and spindle 190v servo.
Only the spindle got encoder, the rest got some kind of synk.
I think is seems to be possible to control these drivers with another universal controller when I read the electric schematics.
Need to do some research regarding atc and toolchange.
Also need to add som inductive limit switch to xyz.
Did read some threads about vmc 100 but i need some assistance regarding this servos functionality in my conversion
/Best regards Fredrik =)