584,861 active members*
4,662 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Aug 2018
    Posts
    1

    Fanuc Oi-Mate-Tc no cycle start

    we have the cnc turning of goodway runing smooth more then 5 years yesterday it does not working on cycle start button also light is litting up when press the cycle start and there is no any alarm on display and drive.axis movement on hand mode fine zero return fine.

    Please help.

  2. #2

    Re: Fanuc Oi-Mate-Tc no cycle start

    Check the ladder and see if G7.2 coil goes on then off when you press the cycle start button. Also check that G8.5 coil is on.

  3. #3
    Join Date
    Aug 2019
    Posts
    145

    Re: Fanuc Oi-Mate-Tc no cycle start

    You may also check the Diagnostic screen located under System. The 1st screen has several items that can hold up program execution (cycle start light on but no motion)

    Some items shown include; Motion, Feedrate override 0, Interlock/startlock, etc. This may provide a starting point.

Similar Threads

  1. FANUC 6T NO MDI & NO CYCLE START
    By mdang in forum Fanuc
    Replies: 9
    Last Post: 11-07-2017, 07:08 PM
  2. Fanuc 0i-md cycle start not work..
    By tkea in forum Fanuc
    Replies: 3
    Last Post: 10-27-2016, 07:16 AM
  3. Fanuc 0i Cycle Start not executing
    By hell_pk in forum Fanuc
    Replies: 4
    Last Post: 12-11-2015, 02:49 PM
  4. Fanuc O-TT cycle start not working?
    By BryCAM in forum Fanuc
    Replies: 2
    Last Post: 06-05-2010, 11:20 AM
  5. Cycle Start output on Fanuc 15-MA
    By davider in forum Fanuc
    Replies: 3
    Last Post: 02-14-2008, 04:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •