Hello group, I have acquired 2006 tl2 that was used for ceramic cutting. Needless to say the machine was trashed. Will crazy or not I stripped it down to the bone and plan to rebuild it. New rails and ballscrews are about 7k from Haas. Does anyone have a recommendation to source from a different supplier? They made be proprietary so I may not have a choice but thought I would ask.
Thanks in advance.
Harry
Thread: Haas TL-2 rebuild
Results 1 to 3 of 3
-
10-13-2021, 08:39 PM #1
Registered
- Join Date
- Apr 2004
- Posts
- 6
Haas TL-2 rebuild
-
10-13-2021, 09:58 PM #2
Community Moderator
- Join Date
- Dec 2013
- Posts
- 5717
Re: Haas TL-2 rebuild
Maybe try Hiwin or THK. See if you can find any part numbers on the cars, that will point you in the right direction for the rails.
For the ball screws, again Hiwin. Or Google search for ball screw rebuilders.Jim Dawson
Sandy, Oregon, USA
-
10-14-2021, 03:47 AM #3
Registered
- Join Date
- Apr 2004
- Posts
- 6
Re: Haas TL-2 rebuild
Thx you
Reply With Quote
Similar Threads
-
Rebuild
By bat47 in forum Mach Software (ArtSoft software)Replies: 2Last Post: 04-14-2020, 09:29 PM -
1998 Haas VF4 rebuild
By dubdzine in forum Haas MillsReplies: 1Last Post: 03-10-2016, 10:30 AM -
Haas VF3 rebuild costs
By AKFALAR in forum Haas MillsReplies: 4Last Post: 04-16-2008, 02:34 AM -
rebuild
By corrie in forum CNC Wood Router Project LogReplies: 5Last Post: 03-20-2008, 10:29 PM -
Haas Vf-2 Rebuild
By DEAN in forum Haas MillsReplies: 7Last Post: 09-19-2005, 04:46 AM
Tags for this Thread
Posting Permissions
