Hi.
I have this program on machine to warm up.
;
S2400M3
N10G53G1XYZF5000
N20G53X710Y-400Z-400
(RPT N10,N20)N20
but after some cycles, the machine Stop, but the spindle continues. Someone can help me?
Hi.
I have this program on machine to warm up.
;
S2400M3
N10G53G1XYZF5000
N20G53X710Y-400Z-400
(RPT N10,N20)N20
but after some cycles, the machine Stop, but the spindle continues. Someone can help me?
At the end of the program add m05, which is spindle stop