Greetings all,
Anyone here know if it is possible to take the OEM ladder chips from a 1990 OTC memory board (on a 1990 OTC motherboard), and transfer them to a more recent model , let's say 1995 OTC memory board (on a 1995 OTC motherboard)?
Or, could one substitute the 1990 memory board for the 1995 memory board on the 1995 controller MB?
In other words, are the 1995 OTC controller components backwards compatible?
Thanks
Results 1 to 2 of 2
-
10-21-2021, 08:24 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 5
Fanuc OTC OEM ladder eprom chips .
-
10-22-2021, 01:50 AM #2
Member
- Join Date
- Apr 2011
- Posts
- 841
Re: Fanuc OTC OEM ladder eprom chips .
Why would you want to do that? You know that the ladder was written for a particular machine. Changing the chips alone can cause many problems. The I/O assignment was written by the MTB. (X12.7 is not the same for every machine with a 0TC controller). Neither are any of the other inputs and outputs. Also the CNC Diagnostic are values that the ladder reads and writes to.
Reply With QuoteSimilar Threads
-
DNC, drip feed, Old fanuc OM-B, need to modify Ladder for g127.5 , Eprom
By systronic in forum FanucReplies: 19Last Post: 10-09-2023, 07:18 PM -
Fanuc 0-MC - No physical eprom - Ladder lost after reset memory
By systronic in forum FanucReplies: 4Last Post: 05-05-2021, 01:08 PM -
Looking for 27C64 Ladder chips Fanuc 0-A or B
By Shoprag in forum FanucReplies: 31Last Post: 03-24-2021, 04:30 AM -
Fanuc OMB reading eprom, editing ladder through DOS or upgrade to OMC?
By Bodesi in forum FanucReplies: 2Last Post: 12-04-2019, 08:57 PM -
Fanuc pmc L oel and oe2 ladder chips
By alienturtle in forum FanucReplies: 1Last Post: 07-25-2019, 11:21 PM
Tags for this Thread
Posting Permissions
