584,798 active members*
4,241 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1

    Laser beam wobble

    Help! I am new to lasers. This is an 80 watt red/black Chinese machine.
    Power level 9ma.
    Chiller temp 72 deg f
    What makes the beam wobble at the output end?
    thanks!

  2. #2
    Join Date
    Nov 2008
    Posts
    644

    Re: Laser beam wobble

    I run my temperature at 62 deg F and 9 ma seams low for an 80 watt tube. But neither would make the beam wobble. Never heard that before, maybe the tube is going bad. Or there is a mechanical vibration in the machine.


    Sent from my iPhone using Tapatalk

Similar Threads

  1. gcc c180 laser engraver problem .. laser tube firing a continuous weak beam
    By badrawy in forum Laser Engraving / Cutting Machine General Topics
    Replies: 2
    Last Post: 05-27-2020, 01:41 AM
  2. Replies: 0
    Last Post: 07-05-2016, 09:24 AM
  3. Laser beam runs on the outside of the laser tube!
    By dadde in forum Laser CO2 Tubes, Diodes, RF and Power Supplies
    Replies: 1
    Last Post: 04-18-2015, 03:19 PM
  4. No laser beam...
    By Laser Larry in forum Laser Engraving / Cutting Machine General Topics
    Replies: 9
    Last Post: 05-10-2013, 07:13 AM
  5. How align IR beam (co2) with visible beam (red dot laser) ?
    By etienne delcuve in forum Laser Engraving / Cutting Machine General Topics
    Replies: 7
    Last Post: 02-04-2009, 12:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •