Help! I am new to lasers. This is an 80 watt red/black Chinese machine.
Power level 9ma.
Chiller temp 72 deg f
What makes the beam wobble at the output end?
thanks!
Help! I am new to lasers. This is an 80 watt red/black Chinese machine.
Power level 9ma.
Chiller temp 72 deg f
What makes the beam wobble at the output end?
thanks!
I run my temperature at 62 deg F and 9 ma seams low for an 80 watt tube. But neither would make the beam wobble. Never heard that before, maybe the tube is going bad. Or there is a mechanical vibration in the machine.
Sent from my iPhone using Tapatalk