584,802 active members*
5,112 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2021
    Posts
    2

    Mazak STX48/L32B Not Accepting Gcode

    This machine has run near flawlessly for 10 years,
    Yesterday it just stopped listening to the computer feeding the DNC (Serial over the tape Interface)

    have tried 3 computers, 2 usb to serial adaptors and scratch made a new cable.
    I have attached a logic analyzer and can confirm we are sending data.
    The strange part is we can still pull data from Mazak to the PC.

    Is there any silly thing we may have missed,
    does anyone know if there is a method to try attach a FDD for a different load method? or does that come over the same interface anyway?

    Also if there are any Service/Tech manuals people could point me toward would be much appreciated.

  2. #2
    Join Date
    May 2018
    Posts
    27

    Re: Mazak STX48/L32B Not Accepting Gcode

    do you need a EIA to mazatrol conversion ? added did your machine come with that option

Similar Threads

  1. Changing language of mazatrol l32B
    By Elmecado55 in forum Laser Control Software
    Replies: 0
    Last Post: 06-15-2021, 07:37 PM
  2. Service mode in Mazatrol L32B (Mazak NTX48).
    By H_exar in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 06-09-2020, 06:54 PM
  3. Service mode in Mazatrol L32B (Mazak NTX48 laser cutter).
    By H_exar in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 08-30-2012, 11:45 AM
  4. Installing gcode option in mazak qt30
    By Duesentrieb in forum Mazak, Mitsubishi, Mazatrol
    Replies: 5
    Last Post: 08-28-2012, 03:27 PM
  5. RS232 settings Mazatrol L32B
    By ittim in forum Laser Engraving / Cutting Machine General Topics
    Replies: 1
    Last Post: 01-20-2011, 03:17 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •