[Witmen]

Hello everyone! I am looking for parameters and a ladder for the HG 400 III machine, CNC Fanuc 15 m, 1995 release.
CNC F15M14 series A0D2N version 0014
System Boot Series: 6014
Digital Servo Series: 9080
PMC-NA series: 4046

I would have any data to restore the machine, if someone has data on this machine. Please send me [email protected]

[shas595]

Hello
I just sent you an email

[crawmach]

Do you offer support for Hitachi EDMs?

[Witmen]

Do you offer support for Hitachi EDMs?

no friend, I'm looking for parameters for an empty machine

[crawmach]

no friend, I'm looking for parameters for an empty machine

Sorry for your loss
I meant that message for shas595

[Witmen]

Point me in the right direction to start this machine.

[crawmach]

Here's my problem'
Machine was running making decent parts then decided to
connect to PC via RS232. Was attempting to send a program to PC
machine locked up during transfer attempt. Had no choice but to
power off machine. When powered back up the machine language was
Japanese. Cannot get it back to English to save my neck.

[phucrobusl]

Contact me on [email protected]

[cncmakers001]

Hello everyone! I am looking for parameters and a ladder for the HG 400 III machine, CNC Fanuc 15 m, 1995 release.
CNC F15M14 series A0D2N version 0014
System Boot Series: 6014
Digital Servo Series: 9080
PMC-NA series: 4046

I would have any data to restore the machine, if someone has data on this machine. Please send me [email protected]

Have you solved the problem?
If not, 1995 is too long time now, could use a CNC retrofit kit to renew the machine.