Product Description
Product Name:UltraScan10 Product description: UltraScan10 the input aperture is 10mm (compatible with 1064nm 355nm 532nm 10.6um lenses ), uses digital driver, fully self-developed driver/ control algorithm/ motor. Strong interference resists performance, high speed, high precision; suitable for high-precision marking, cutting and welding., etc.


SPECIFICATIONS FOR 10MM ULTRASCAN GALVO SCAN HEAD

Parameters Input Aperture 10mm
Beam Displacement 12.54mm
1% of full Scale Step Response error 0.4ms
10% of full Scale Step Response Error 1.2ms
Positioning Speed 10m/s
Weight 1.9kg
Dynamic Performance Tracking Error 0.18m/s
Repeatability <4urad/k
Offset Drift <15urad/k
Gain Drift ＜80urad/k
Long-term Drift Over 8 Hours <0.3mrad

Optical Performance Typical Scan Angle ±12.5°
Gain Error ＜5mrad
Zero Offset <5mrad
Nonlinearity <0.4%
Power Requirements ±15V DC, ≥3A
Digital Interface XY2-100
Operation Temperature 25℃ ± 10℃

Main Features
1) High-precision grating ruler as feedback, 18-bit resolution.
2) Low noise, excellent linearity, and minimal drift.
3) Based on FPGA, the digital driver has strong interference resist ability and excellent dynamic performance.
4) Well waterproof and dustproof performance.
5) Fit a variety of kinds of F-theta lenses.
6) Successfully used for high precision marking, FPC cutting, and high-precision welding, etc.