549,941 active members*
3,604 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Work-NC > WorkNC Haas VM3 NEW GEN PostProcessor
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Nov 2021
    Posts
    1

    Question WorkNC Haas VM3 NEW GEN PostProcessor

    Hi guys,

    I'm new here, I'm looking for a postprocessor for worknc 2018 R2 for a HAAS VM3 NewGEN machine, or someone who can change my old postprocessor to give me trailing zeros in the F command.

    Right now the current postprocessor has the coordinates and feed like this:

    "X100.Y200. F3500"

    but what I need is the following:

    "X100.Y200. F3500."

    If someone can help me, I appreciate it.

    Best Regards
    Last edited by Avelino_LC; 11-02-2021 at 09:11 PM.

  2. #2
    Moderator Dan B's Avatar
    Join Date
    Apr 2003
    Posts
    1331

    Re: WorkNC Haas VM3 NEW GEN PostProcessor

    Did you get this solved? If not, look at line #30 in your post.

    1 0 0 F : 30 Format of speed commands : 0=n/a

    That third digit needs to be a 0 to add the decimal point after the feed.

    Sorry, I didn't notice this post a month ago. This forum is so dead that its seldom on my radar to look at.

    Dan
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •