Dear All
We have a Kjellberg Cutline 40G plasma cutter which we want to connect to our CNC controller. We added a machine torch to the Plasma cuttent and use it manually with the CNC controller. We need help in how to integrate the Plasma cutter to the CNC controller and the height controller.
Your feedback is appreciated.
Thanks in advance
Nizam
Results 1 to 2 of 2
-
11-07-2021, 06:32 AM #1
- Join Date
- Apr 2021
- Posts
- 1
Connecting Kjellberg CUTLINE 40G plasma cutter to chinese Starfire CNC Controller
-
05-30-2022, 07:48 AM #2
- Join Date
- May 2022
- Posts
- 4
Re: Connecting Kjellberg CUTLINE 40G plasma cutter to chinese Starfire CNC Controller
I have a similar problem. Let me know if you find a solution please.
Reply With QuoteSimilar Threads
-
Connecting PowerMax 65 to Chinese THC and Controller
By kamkama in forum Hypertherm PlasmaReplies: 2Last Post: 12-06-2023, 02:42 AM -
post processor for artcam and starfire plasma controller
By aleccoh in forum Post Processor FilesReplies: 1Last Post: 03-12-2019, 10:02 AM -
Problem connecting Cutmaster A80 with chinese controller Starfire
By Haglitoma in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 0Last Post: 11-12-2018, 11:34 AM -
Kjellberg cutfire 100i match with SteelTailor portable CNC plasma cutting machine
By Steel Tailor in forum News AnnouncementsReplies: 0Last Post: 04-02-2014, 02:58 AM -
CHINESE CNC PLASMA CUTTER
By agachero in forum Waterjet General TopicsReplies: 20Last Post: 11-23-2009, 08:49 PM
Tags for this Thread
Posting Permissions
