Hi all
im having problems transferring data to my tnc151
using TNC Server - i have been trying ME - 2400 and FE - 9600
i have managed to transfer data (out) from the 151 to the laptop but i cant go the otherway around
i used these pin outs to get it transfer data out
Im trying to read the program back in that i read out, ive tried .txt and .H extensions
This is the diagram im currently on for wiring the data cable (see attached)
9 pin -25 pin
2-2
3-3
7-5
8-4
5-7
6-20
4-6
also 9 pin loop 1-6
25 pin loop 8-6