We have obtained a Thermwood C50. It's a 3 axis system with Baldor dc servo motors models 4545 and 4535. They have voltages of 180 vdc. Mechanically it is sound but the control system doesnt work. Does anyone have some advice or options that might work to get this thing rollling again?
Tks
Thread: Thermwood C50
Results 1 to 2 of 2
-
08-27-2007, 03:47 AM #1
Registered
- Join Date
- Aug 2007
- Posts
- 1
Thermwood C50
-
08-28-2007, 09:24 PM #2
Member
- Join Date
- Dec 2003
- Posts
- 1218
The Thermwood controller has a display screen that can be accessed from the keyboard to check the various inputs.If the controller is a 91000 or newer it should indicate the fault if the software can load and identify the problem.If there is absolutely no indication of life in the controller you need to call Thermwood their technical guys are very helpful and ought to know more about the machine than anybody.
Reply With QuoteSimilar Threads
-
Used thermwood parts
By zachf in forum CNC Machining CentersReplies: 4Last Post: 09-27-2011, 01:27 PM -
Thermwood cnc?
By tim in pa in forum Commercial CNC Wood RoutersReplies: 5Last Post: 06-14-2011, 06:56 PM -
Thermwood frame value??
By gabhart in forum Commercial CNC Wood RoutersReplies: 5Last Post: 06-06-2007, 09:19 PM -
Post for Thermwood
By MegaMoog in forum Uncategorised CAM DiscussionReplies: 0Last Post: 01-20-2005, 09:03 PM
Posting Permissions
