If anyone that is working to rebuild a Dyna/Dyna Myte 2000, 2100, 2200 or 2400 CNC mill and are in need of the little cylindrical cap that goes over the spindle shaft on the top cover of the spindle drive assembly, I have these available. I 3D print these out of black ABS plastic. I designed the model for this from the original CAD drawings of the part. I am selling them for $15.00 plus a flat rate shipping. Shipping to anywhere in the US is $5.00. If there is interest, and if it is allowed in the forum, I will post the link to my website store for this part.
Results 1 to 4 of 4
-
11-10-2021, 06:25 AM #1
Member
- Join Date
- Sep 2021
- Posts
- 8
Dyna 2000, 2100, 2000 and 2400 plastic spindle cover
-
11-10-2021, 07:10 AM #2
Member
- Join Date
- Sep 2021
- Posts
- 8
Re: Dyna 2000, 2100, 2000 and 2400 plastic spindle cover
Attached are some pictures of the spindle cover.
-
11-11-2021, 02:56 AM #3
Member
- Join Date
- Sep 2021
- Posts
- 8
Re: Dyna 2000, 2100, 2000 and 2400 plastic spindle cover
-
05-29-2022, 05:32 PM #4
Member
- Join Date
- Sep 2021
- Posts
- 8
Re: Dyna 2000, 2100, 2000 and 2400 plastic spindle cover
My old shop link for this is no longer valid. Please use the link below to my ebay store for this part.
https://www.ebay.com/itm/265410323738
Reply With Quote
