584,874 active members*
5,364 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Controller & Computer Solutions > Anilam 6000M losing tool table and tool changer position - HELP
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2016
    Posts
    2

    Anilam 6000M losing tool table and tool changer position - HELP

    I have had a Kent JM450 CNC mill for a number of years and it has run very well until recently.

    If I let the mill sit, power off, for an extended period (around 30 days) when I boot it back up the tool table is gone and the tool changer loses its position (call T6 and end up with T2).

    If I reenter all of the tools and manually re-index the tool changer (take the servo motor out and move the changer to the correct location) everything works great. I can shut down and reboot and everything is still there. It is only when shut down for long periods that I have a problem.

    Question 1: Has anyone else had this issue and what is the fix?

    Question 2: Is there any way to re-index the tool changer in software instead of manually moving it?

    Any help would be very much appreciated. This is getting old fast :-(

  2. #2
    Join Date
    Mar 2023
    Posts
    1

    Re: Anilam 6000M losing tool table and tool changer position - HELP

    Hi Just wondering did you find the problem with this ?

  3. #3
    Join Date
    Oct 2023
    Posts
    5

    Re: Anilam 6000M losing tool table and tool changer position - HELP

    Quote Originally Posted by Turbinecopter View Post
    I have had a Kent JM450 CNC mill for a number of years and it has run very well until recently.

    If I let the mill sit, power off, for an extended period (around 30 days) when I boot it back up the tool table is gone and the tool changer loses its position (call T6 and end up with T2).

    If I reenter all of the tools and manually re-index the tool changer (take the servo motor out and move the changer to the correct location) everything works great. I can shut down and reboot and everything is still there. It is only when shut down for long periods that I have a problem.

    Question 1: Has anyone else had this issue and what is the fix?

    Question 2: Is there any way to re-index the tool changer in software instead of manually moving it?

    Any help would be very much appreciated. This is getting old fast :-(
    Did you ever solve the problem I have to Anilam 6000m tool changer codes to reset the carousel

Similar Threads

  1. Tool changer out of position scm record 220
    By Benaiah in forum Commercial CNC Wood Routers
    Replies: 9
    Last Post: 01-28-2024, 01:55 PM
  2. FA630 tool changer out of position
    By ATSATHENS in forum Toyoda
    Replies: 1
    Last Post: 02-08-2022, 03:21 PM
  3. Y Axis position issue on a Fryer MC-60 Anilam 6000M Controller
    By Fonzi in forum Controller & Computer Solutions
    Replies: 1
    Last Post: 09-10-2015, 02:28 PM
  4. ANILAM 6000M tool change corrector problem!
    By Shishkinnick in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 12-04-2014, 04:13 PM
  5. Replies: 9
    Last Post: 03-22-2008, 05:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •