585,567 active members*
3,547 visitors online*
Register for free
Login

Thread: Homing Problem

Results 1 to 3 of 3
  1. 02-06-2022, 09:30 AM #1
    Macwolf
    Macwolf is offline
    Join Date
    Jul 2021
    Posts
    9

    Question Homing Problem

    Hello, I use the MK3/9 card for a lathe, I want to reference the X, Z axes. X is Min, Z in Max. The problem I have is that the Z axis moves in the direction of Max, and then with G0 to Min position. Why is that, thanks Markus
    Reply With Quote Reply With Quote
  2. 02-06-2022, 01:58 PM #2
    ScorpionTDL
    ScorpionTDL is offline
    Join Date
    Aug 2020
    Posts
    131

    Re: Homing Problem

    what are your settings in
    Programm Options/Home/Move to/Z

    after homing the system moves the axis to the value defined there.
    If you have Set the Z Switch position to 200 (for example) and have the Move To Postion set to 0 (I think thats the default value) it will home on, assume that its on Z 200 and then moves to Z0
    If it should stay at 200 you need to set the Move To Postion for Z to 200 as well
    Reply With Quote Reply With Quote
  3. 02-09-2022, 03:25 AM #3
    Macwolf
    Macwolf is offline
    Join Date
    Jul 2021
    Posts
    9

    Re: Homing Problem

    Thanks I'll try when I get a chance
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Homing Problem
    By garryg in forum Mach Mill
    Replies: 3
    Last Post: 09-21-2014, 06:59 AM
  2. Homing Problem
    By red_alert in forum LinuxCNC (formerly EMC2)
    Replies: 14
    Last Post: 08-15-2010, 03:50 AM
  3. Homing problem
    By airtime in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 06-07-2010, 11:27 AM
  4. X4+ homing problem
    By rzmac in forum Syil Products
    Replies: 3
    Last Post: 03-16-2010, 05:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules