Hi, all! Im new member.
Have an okuma mx45-vae with OSP700m
Ran into a software problem for this machine. The machine has stopped due to a problem with the SVP board. After replacing it, I reinstalled the software. The disks 3,5 with the software turned out to be alive, now there was a problem in restoring the machine parameters. To do this, I must have "disk D" according to the manual. Havent paper copy with parametrs. There is nothing to enter manually. In OSP, the date PIP is absent. The hope remains to find in the disk to fill in the parameters from the back-up disk or papers with parameters for this machine. Maybe someone stuck with a similar problem and can help? Maybe someone made a copy image "D disk" and can share it?