good day to everyone,
my goal is to write a G Code program based on the input of a KMotionCNC graphics page to execute a complete thread G32 based. As u can see from attached screenshots, I used the instruction
GetEditControlDouble(variable,VAR,offset)
to read the Controls inside the page, but I get always a NULL value. Of course there is something wrong, but I can't to understand where.
Some advice to fix the problem?
Beppe
Results 1 to 12 of 12
Threaded View
-
11-14-2021, 10:50 AM #1
- Join Date
- Apr 2019
- Posts
- 52
Dialogue problems between KMotionCNC and C program
Reply With QuoteSimilar Threads
-
Set Cycle Start Button in KmotionCNC by .c program
By felluco in forum Dynomotion/Kflop/KanalogReplies: 1Last Post: 03-19-2019, 04:39 PM -
Looking for a program to use a touch probe to create a point cloud with KMotionCNC
By JoeKumanchik in forum Dynomotion/Kflop/KanalogReplies: 6Last Post: 02-09-2017, 06:48 AM -
KmotionCNC - Sending information to user program?
By nickcornilsen in forum Dynomotion/Kflop/KanalogReplies: 5Last Post: 01-29-2013, 03:56 AM -
Ramping dialogue box
By skipper in forum SolidCAM for SolidWorks and SolidCAM for InventorReplies: 11Last Post: 03-10-2009, 01:44 PM -
Cant Resize Dialogue Box
By Jedi in forum MastercamReplies: 1Last Post: 02-28-2007, 11:19 PM
Tags for this Thread
Posting Permissions
