3/4" x 3/4" x 24" aluminum bars (2 needed) drilled as per sketch - holes are drilled 1/2" deep and hole size is so a #8D finish nail can be snuggly inserted into each (#39 drill?).
Thread: RFQ Drilled Aluminum bar
Results 1 to 3 of 3
Hybrid View
-
11-14-2021, 05:13 PM #1
Registered
- Join Date
- Aug 2016
- Posts
- 35
RFQ Drilled Aluminum bar
-
11-15-2021, 08:25 AM #2
Registered
- Join Date
- Aug 2016
- Posts
- 35
Re: RFQ Drilled Aluminum bar
Better make it 1/2" thick bars drilled thru. Would have edited request but apparently cannot(?). Also still cannot find out why it keeps saying I am posting from a mobile device when I am not or edit some of my profile info!
-
12-09-2021, 07:30 AM #3
Registered
- Join Date
- Feb 2018
- Posts
- 21
Re: RFQ Drilled Aluminum bar
Is this job still open?
Sent from my SM-N975U1 using Tapatalk
Similar Threads
-
7075 bar stock turned and center drilled
By advert in forum RFQ (Request for Quote)Replies: 3Last Post: 11-04-2016, 04:41 AM -
RFQ: 250 pieces 5052 aluminum bar stock + 2 dowel pins
By ahk199 in forum North America RFQ'sReplies: 8Last Post: 02-14-2013, 02:08 AM -
20MM round bar drilled and tapped
By bp238 in forum RFQ (Request for Quote)Replies: 0Last Post: 07-22-2011, 12:58 PM -
Hex Bar Stock turned and drilled/tapped
By ez3022 in forum Employment OpportunityReplies: 4Last Post: 10-01-2010, 12:04 AM -
RFQ: UHMW Cut to length and drilled
By mrbaseball in forum Employment OpportunityReplies: 9Last Post: 11-10-2005, 12:34 AM
Tags for this Thread
Posting Permissions
