555,240 active members*
1,929 visitors online*
Register for free
IndustryArena Forum > MetalWorking Machines > Okuma > OKUMA DNC-C Ethernet Function
Results 1 to 3 of 3
  1. #1

    Join Date
    May 2021

    OKUMA DNC-C Ethernet Function

    hi everyone
    i want to use OKUMA DNC-C function , can send me a sample .

  2. #2
    Join Date
    Apr 2009

    Re: OKUMA DNC-C Ethernet Function

    First, does you machine have the option for DNC-C? There should be an additional panel on the machine that says DNC that has two switches on it. Next question, what control are you working with?

    Best regards,
    Experience is what you get just after you needed it.

  3. #3
    Join Date
    Aug 2011

    Re: OKUMA DNC-C Ethernet Function

    "Imagination is more important than knowledge."

Similar Threads

  1. Use Ethernet in DNC mode
    By zzzoprah in forum Haas Mills
    Replies: 1
    Last Post: 09-11-2015, 03:44 PM
  2. Fanuc 0i-MD - DNC over Ethernet
    By popex in forum Fanuc
    Replies: 6
    Last Post: 07-12-2015, 10:08 AM
  3. Fanuc DNC with Ethernet
    By elab.ess in forum Fanuc
    Replies: 3
    Last Post: 07-14-2014, 11:41 AM
  4. DNC over ethernet
    By toge in forum DNC Problems and Solutions
    Replies: 1
    Last Post: 08-24-2012, 02:45 PM
  5. Replies: 0
    Last Post: 02-10-2010, 12:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts