Recently changed my servo module. Now the spindle module is is not getting ready. Meaning the spindle motor is not getting excited. How can overcome this problem. Thanks in advance
Sent from my itel W5001P using Tapatalk
Recently changed my servo module. Now the spindle module is is not getting ready. Meaning the spindle motor is not getting excited. How can overcome this problem. Thanks in advance
Sent from my itel W5001P using Tapatalk
Gonna need more info. Are there any alarms on the spindle module? Any alarms on the CNC or the servo module? What version control is this? Are you sure you hooked the servo module up correctly? Is the machine still in e-stop? Attach a picture of the cabinet with the servo/spindle modules
Hie. There are no alarms on the Spindle module not on the servo module. The control is Fanuc OT. Yes l wired it up correctly. The machine is not in eStop. Am going back to the workshop on Mon January 10.Can send you pictures then. My number is +263772763789. We can chat on WhatsApp for faster communication.
Sent from my itel W5001P using Tapatalk
You can check what is the alarm code on Fanuc OT control.
With the alarm code we can address the problem.
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html