Some progress...
Attachment 476394
Milling oil grooves
Attachment 476402
Ballscrews!
Attachment 476404
Testing the movement, and they are silky smooth...
Some progress...
Attachment 476394
Milling oil grooves
Attachment 476402
Ballscrews!
Attachment 476404
Testing the movement, and they are silky smooth...
Halfnutz
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
So I finally got the servos mounted and rigged up for testing and running with Mach 3.
Attachment 476406
All calibrated and running great!
Attachment 476408
Halfnutz
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)