585,582 active members*
4,649 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking > Bending, Forging, Extrusion... > cybelec DNC 880S indexing not complete

Thread: cybelec DNC 880S indexing not complete

Results 1 to 3 of 3
  1. 11-19-2021, 06:10 AM #1
    veritasplc
    veritasplc is offline Member
    Join Date
    Nov 2021
    Posts
    1

    cybelec DNC 880S indexing not complete

    Hii everybody
    We have an ADIRA plate bending / pressbrake with cybelec DNC 880S windows based control. The machine not indexing. The blade goes upwards as it does normally but the controller keep showing indexing and not coming to working mode.
    We dont have any error messages.

    Your help highly appreciated

    THANKS
    Reply With Quote Reply With Quote
  2. 07-29-2023, 11:23 AM #2
    ariehoogenboom
    ariehoogenboom is offline Member
    Join Date
    Jul 2023
    Posts
    1

    Re: cybelec DNC 880S indexing not complete

    Have you found the solution? I have the same problem…
    Reply With Quote Reply With Quote
  3. 08-28-2023, 02:01 PM #3
    Chino_007
    Chino_007 is offline Member
    Join Date
    Jun 2014
    Posts
    3

    Re: cybelec DNC 880S indexing not complete

    after the blade going up. the X axis (back gauge) will be move.
    if the X Axis not move check the Servo drive..
    if it moves after that is crowing system.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules