This video reflects the speed achieved over Mach3 in real time.
This is Rick Perry's video reflecting that he listened to the comments offered to try to get Mach3 to Pumotix speed, and still it failed.
Results 1 to 6 of 6
Threaded View
-
11-24-2021, 11:01 AM #1
Member
- Join Date
- Nov 2012
- Posts
- 474
Pumotix Beats Mach3 In Real Time 120000 IPM Achieved At 50 SPU!
Reply With QuoteSimilar Threads
-
Pumotix Is Up To 23% Faster Than Mach3, Mach4, and UCCNC...
By storm2313 in forum VideosReplies: 5Last Post: 11-05-2021, 07:18 PM -
Mach3 to Pumotix 64bit Motion Control Software Conversion...
By storm2313 in forum VideosReplies: 0Last Post: 10-26-2021, 06:08 PM -
After running AI APC for 1st time, cannot exceed 3.75 IPM on arc moves
By chishgre in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 07-25-2016, 08:05 PM -
Real Time error
By Bradan Eudy in forum Cincinnati CNCReplies: 0Last Post: 03-29-2012, 05:10 PM -
real time
By Mr Bits in forum LinuxCNC (formerly EMC2)Replies: 8Last Post: 12-26-2007, 01:09 AM
Tags for this Thread
Posting Permissions
