Originally Posted by
go-olly-go
Hello all, newly registered and would appreciate any help with this one!
I have a morbidelli N100 cnc router for panel processing, and am based in the UK.
The manual states that the spindle head should be warmed up prior to use, but does not tell you how to!
I have seeked advice from the machine company technician that sold us the machine, but still having problems.
Thus far we have been told to go to MDI tab in panelmac, press F12 twice to get the screen for spindle functions and in the lower most box enter 8 (for 8000rpm) and in the box above enter 0. upon pressing return key the box goes green and then you are to just press the start button, either on the PLC or the hand controllor.
this procedure works maybe just once in 50 or more attempts, but mostly returns a message saying incorrect programming.
Does anyone else have any issues with warm up procedure or can tell me where i am going wrong??
look forward to any replies.
Olly