Hi all.
we have a SL-25MC with MSD-516 control.
Error "087 buffer over flow " appears when I try to send a long program . The program is also received incompletely.
but when i try to send a short program its ok .
Is it possible to change the amount of device memory through parameters?
This problem did not exist before on the device.
I made the following settings but the problem was not solved:
Right-click on "My Computer" icon and select "Manage"
Select "Device Manager"
Find the entry "Ports (COM and LPT" and click the + sign to see what's listed under it.
Right-click on the COM port you are using (COM1?) and select "Properties"
Click the "Port Settings" tab, then the "Advanced" button.
Find the left/right slider control for the "Transmit buffer" and move it all the way to the LEFT (lowest setting).
Thank you very much for your guidance.