584,812 active members*
5,435 visitors online*
Register for free
Login
IndustryArena Forum > OpenSource CNC Design Center > Arduino > There is quite problem with drive parameters
Results 1 to 2 of 2
  1. #1
    Join Date
    Oct 2016
    Posts
    15

    There is quite problem with drive parameters

    hello i am quite interest in the project about DDS AD9910 Arduino Shield Signal Generator .. I need about 2MHZ dual chanell square wave gen.. with3 function set freq, phase shift and dutty ( but not mirrored but phase shiftet dutty.. mean if Achanell get 30%duty, Bchannel wil be have 30|% too and not 70 nlike ad9833 or etc.. ) can you suggest me something,? one channel is not interesting to me there is quite problem with drive parameters i need..

  2. #2
    Join Date
    Mar 2009
    Posts
    1982

    Re: There is quite problem with drive parameters

    numerous solutions available. Can you describe what you did already and what happens?

Similar Threads

  1. Haas VF-0 Spindle Drive Parameters, Please
    By roofis27 in forum Haas Mills
    Replies: 5
    Last Post: 05-26-2022, 04:40 PM
  2. Fanuc servo drive parameters
    By kevinzwli in forum Servo Motors / Drives
    Replies: 1
    Last Post: 06-19-2017, 10:40 AM
  3. Yaskawa drive parameters
    By ajwaverider in forum Servo Motors / Drives
    Replies: 1
    Last Post: 01-27-2014, 09:39 PM
  4. 97 VF-3 spindle drive parameters
    By GITRDUN in forum Haas Mills
    Replies: 1
    Last Post: 09-03-2012, 12:13 AM
  5. 1993 VF2 Spindle Drive Parameters
    By tbussan in forum Haas Mills
    Replies: 5
    Last Post: 10-06-2010, 03:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •