Wondering if anyone else has experienced this issue, this just started over the weekend?
Running a China Zone 60x90
All 3 axis are calibrated and move accurately when doing the calibration distances
Everything on the first pass is correct to scale
When going for second pass Y axis is always less than where it is supposed to be. It not a constant number off, just always less.
That pass is then done perfectly other than it keeps shifting on the Y axis.
I was thinking maybe my G code got messed up somehow, but I hit stop after it began the 3rd pass and then jogged back to my Y limit and found the CNC thought it was 15mm away from the y axis being at 0, so I think I am at a hardware issue.
Not sure if something in the motor is not counting the steps correctly in rapid movement, or if something else.
I am going to make a simple 3/4" box tonight and see what happens
I think I am going to try and swap X and Y stepper motors see if it follows the motors.
After that I guess I would be at swapping out X and Y controllers to see it if follows them
Thanks in advance, any ideas are welcome...I like to have some type of game plan ready when I get home to figure this out