Hi All! So I have the famous VFD HY01D523B. I've adjusted it according to my 1.2 KW 400HZ 24000 RPM spindle. I've also connected the spindle to my WI XHC V control board. The problem I have is that the speed on Mach 3 is mismatching with the HZ on the VFD. I found that when I put 12000 RPM on the program the VFD shows 214HZ which is more. I looked on the Internet and people are saying to buy Modbus, but I already have a controlling board. I've found also an Excel sheet that generates what's called: "Linearity.dat"
I did everything from this video, but still, nothing changed.
https://www.youtube.com/watch?v=KaQiOzQVcsk&t=314s
Is it a setting in Mach3 that has to be changed, or it's an adjustment on the VFD? How can I sync these 2two parameters?
Thanks in advance.