Sometimes, not always but frequently, dropbox doesn't refresh on the mill.
when I change a program in the house and save it to dropbox, either as the same name or a new name, then go out to the shop and check for it on the mill it's not changed or not there.
I can change directories and look in other places and load other programs off dropbox but the new stuff isn't there. Go check in the house and it's there, check on a different computer and it's there, but the mill doesn't "see" it

I'll end up going back to the house, saving to a usb and sneaker-netting it out to the shop
Then, if it's the same program name, I'll change the program on the machine and start cutting and a while later it finally "sees" the change in dropbox and lets me know the program has changed on the disk and should it reload.....

Doesn't seem to be a network issue, I can see it's connected and everything and it seems to have a cache of the "old" programs on dropbox

Is there any way to force a refresh of the dropbox connection on the mill?

Thanks
M