Originally Posted by
Tobitoibsen
Hey guys,
Me and my dad tried a lot to make a chinese servo (90st-m02430) work as spindle with mach3, but we dont succeed. I really need some help as beginner.
Mach3 is running already, the steppers on my router work for x,y,z.
Also the servo is running, when we control it from the controller itself. But it doesn't work with mach3.
The mach3 board is a chinese red usb board.
I guess the pins and maybe ports are incorrect. Maybe also other settings, but i dont know what. Also we don't find much information for this topic.
We tried the same settings like in the follwoing video, which didn't work for us
I would appreciate some advice here