585,585 active members*
3,776 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Mazak, Mitsubishi, Mazatrol > Meldas M3 Stuck in the tool change routine. Need help

Thread: Meldas M3 Stuck in the tool change routine. Need help

Results 1 to 6 of 6

Threaded View

  1. 01-08-2022, 07:28 PM #1
    A1CNC
    A1CNC is offline Registered
    Join Date
    Jul 2009
    Posts
    219

    Meldas M3 Stuck in the tool change routine. Need help

    I finally have (HAD) my running to the point I was ready to try the toolchanger.

    I typed in T1M6. The machine oriented the spindle, toolchanger came in, the drawbar opened. Then the spindle rose up, the carosel rotated about half way around ( From where it was moved 5-6 stations) Then the machine kicked out 1001 error LS24 not ready. I realize now I never put numbers in the tool register before commanding the tool change so no wonder it got lost

    Now I can't do anything. I tried everything I could think of. Hit re-set, power off/ on. Even manually rotated the carousel with the power off. There is a couple things in the manual about registering the tool in the spindle that I tried and still no go.

    I am sure someone else had this happen but so far I have not found anything by searching.

    Please help
    Attached Thumbnails Attached Thumbnails 20191204_191552.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Miyano TSv-35l fanuc o-m . Z stuck in tool change position
    By Chopdr230 in forum Fanuc
    Replies: 1
    Last Post: 01-28-2024, 01:58 PM
  2. Removing subprogram/routine from post and tool change callout
    By Rennfab in forum BobCad Post Processors
    Replies: 1
    Last Post: 02-28-2019, 11:43 PM
  3. Abort during tool change - tool changer stuck
    By yugami in forum Milltronics
    Replies: 5
    Last Post: 07-24-2018, 10:37 PM
  4. Fanuc 0i-TD tool change recovery stuck
    By PearcePump in forum Fanuc
    Replies: 1
    Last Post: 07-27-2015, 03:19 PM
  5. tool change stuck!!!!!!!!
    By jay_dizzle in forum Fanuc
    Replies: 13
    Last Post: 12-21-2010, 03:49 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules