584,817 active members*
4,660 visitors online*
Register for free
Login
IndustryArena Forum > Hobby Projects > Hobby Discussion > CNC machine not cutting normaly
Results 1 to 4 of 4
  1. #1

    CNC machine not cutting normaly

    Hi all,

    I have a problem, when i cut mdf board 18mm and deeping for 2mm, every time when goes around, it is back to y-axis 0, he start not from the same position. And that's every time. There is a Mach3 software show that goes to zero, but it really isn't.
    I used a Stepperoline DM542T, and a Stepperoline 23HS45-4204S engine.

    Can somebody help me? Thank's

  2. #2
    Join Date
    Mar 2008
    Posts
    283

    Re: CNC machine not cutting normaly

    You would need to post you NC-Program code and cutter diameter for an analysis.
    Maybe a simple drawing of what you think you cutter path should look like would help

  3. #3
    Quote Originally Posted by gwood View Post
    You would need to post you NC-Program code and cutter diameter for an analysis.
    Maybe a simple drawing of what you think you cutter path should look like would help
    I draw simple object like photo, on another my cnc the same g-code cutting normaly, but this new and something not good

  4. #4
    Join Date
    Dec 2003
    Posts
    1206

    Re: CNC machine not cutting normaly

    The part could be moving or the machine might be losing steps if you have given it a feed rate that it doesn't have the power to execute.

Similar Threads

  1. Replies: 0
    Last Post: 05-08-2015, 04:10 AM
  2. Replies: 3
    Last Post: 09-19-2010, 02:40 PM
  3. Replies: 0
    Last Post: 09-17-2010, 09:09 AM
  4. Replies: 0
    Last Post: 09-17-2010, 08:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •