584,850 active members*
4,428 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jul 2019
    Posts
    34

    Exclamation HELP ME! Muratec C3000

    I have a Muratec C3000 CNC punching machine. Fanuc OOP. I cleared all parameters to reload by pressing button 0 + Delete + Power on. But after starting the machine in a suspended state as shown below. When I press the MMC/NC button while the machine is booting, the machine enters the Fanuc screen but cannot switch to MDI mode to activate parameter writing. Do you have a way to reload this machine's parameters, please help me.

  2. #2
    Join Date
    Nov 2021
    Posts
    7

    Re: HELP ME! Muratec C3000

    Do you have machine's parameter? ( FD, PAPER LIST, ETC )

  3. #3
    Join Date
    Jun 2021
    Posts
    25
    Quote Originally Posted by baonam2019 View Post
    I have a Muratec C3000 CNC punching machine. Fanuc OOP. I cleared all parameters to reload by pressing button 0 + Delete + Power on. But after starting the machine in a suspended state as shown below. When I press the MMC/NC button while the machine is booting, the machine enters the Fanuc screen but cannot switch to MDI mode to activate parameter writing. Do you have a way to reload this machine's parameters, please help me.
    Are you unable to input parameters in any way? You may have to manually input your 9000 series parameters first.

  4. #4
    Join Date
    Aug 2023
    Posts
    11

    Re: HELP ME! Muratec C3000

    do you have the parameters of this c3000

  5. #5
    Join Date
    Aug 2023
    Posts
    11

    Re: HELP ME! Muratec C3000

    1013 IN PUNCH CYCLE it gives me this error

Similar Threads

  1. Muratec
    By dh08td in forum Fanuc
    Replies: 6
    Last Post: 10-06-2023, 02:46 PM
  2. Fanuc muratec ladder hidden
    By Buterchi in forum Fanuc
    Replies: 6
    Last Post: 11-17-2018, 08:06 AM
  3. Muratec- Centrum 2000-PC
    By dh08td in forum Fanuc
    Replies: 0
    Last Post: 10-17-2018, 01:46 PM
  4. Muratec MW 120 Lathe
    By Doruciprian in forum Fanuc
    Replies: 0
    Last Post: 06-21-2017, 05:19 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •