Re: Fadal 5 axis, trouble with B axis/possible dnc
Originally Posted by
sledhead306
We just got out 5 axis fadal 4020 home, it has a 88hs control. We are using multi dnc to send g code. We struggle to get multi dnc to work, but found We had to delete the information that it was adding to the start of the code, and add "dnc" to the start of the code. Our code is in absolute, and we are having a strange problem, when it calls to move the B axis, it goes past where is should be and will try to crash into the table. Any suggestions or experiences would be a great help.
Never use Fadal before, but Use to run Haas and there is support a option is the setting you should turn on while machine run. Any B axis move beyond the setting will get alarm.
The best way to learn is trial error.