584,837 active members*
5,372 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > CamWorks > Changing some Post Settings
Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jun 2014
    Posts
    1

    Changing some Post Settings

    Needing A bit of help changing a few things about the post processor for my machine. I’m working with a dynapath control. I have the UPG and NC Editor open from CAMWorks and have been using them to edit my post this far. My machine specifically only wants one G command per line.


    Instead of the normal N001G17G20G40G80 safety line

    it wants


    N001G17
    N002G20
    N003G40
    N004G80
    N005G90

    Also the same can be said about M codes, One per line.

    Not sure how to go about doing this.

  2. #2
    Join Date
    Dec 2021
    Posts
    7

    Re: Changing some Post Settings

    Your section code would look like this. Each line needs to start with :T: and end with <EOL>. The <N> is for your line numbers. This is the start of tape section that has your safety line. You would do the same thing for M-codes as well. That's odd that you can only have one G code per line. I've never seen a machine like that and I've run some pretty old machines. Any other machine you can have as many G codes on one line as long as they're not from the same group. Hope this helps

    :T:O<"%4LT"rogram_number><EOL>
    :T:<N><G:17><EOL>
    :T:<N><G!:ENGMET><EOL>
    :T:<N><G!:40><EOL>
    :T:<N><G!:80><EOL>

Similar Threads

  1. Speed settings changing upon loading cnc file from USB on Steeltailor Dragon III
    By JakobSchlobohm in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 0
    Last Post: 08-06-2020, 06:30 AM
  2. Avoid motor resonance by changing / increasing microstep settings?
    By Witsenburg in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 12-26-2013, 01:15 AM
  3. changing default settings
    By routalot in forum Rhinocam
    Replies: 1
    Last Post: 09-27-2013, 08:45 PM
  4. Sinumerik 810M changing default settings
    By ignace in forum SIEMENS -> GENERAL
    Replies: 0
    Last Post: 10-07-2010, 05:18 PM
  5. Changing display settings
    By Stebedeff in forum Fanuc
    Replies: 0
    Last Post: 09-11-2009, 07:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •