584,861 active members*
4,967 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > CNC "do-it-yourself" > Masso with Masso Closed loop steppers
Results 1 to 2 of 2
  1. #1

    Masso with Masso Closed loop steppers

    This might be a stupid question. I'm in the process of getting a parts list. I'm going with a Masso G3 controller and the Masso closed loop steppers. I'm looking at their wiring diagrams and it looks like they are wiring them directly to their controller. Is this correct? What about drivers?
    Attached Thumbnails Attached Thumbnails 47da5bd8e1a8f56d1a58ef4b132738e9.png  

  2. #2
    Join Date
    Nov 2013
    Posts
    4282

    Re: Masso with Masso Closed loop steppers

    Hi,
    that stepper has an built-in driver. With regular steppers the signal wires from the Masso go to the stepper driver an the four power wires go from the driver
    to the stepper.

    Craig

Similar Threads

  1. Replies: 8
    Last Post: 10-19-2018, 08:47 PM
  2. MASSO and Z
    By Matt-y in forum DIY CNC Router Table Machines
    Replies: 0
    Last Post: 03-12-2018, 09:41 PM
  3. parallel to usb? + can i "convert" open loop to closed loop steppers?
    By teglberg in forum Stepper Motors / Drives
    Replies: 33
    Last Post: 08-14-2016, 03:37 AM
  4. Closed loop steppers?
    By pfarber in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 12-11-2006, 10:34 AM
  5. Closed loop steppers
    By pstockley in forum Stepper Motors / Drives
    Replies: 1
    Last Post: 03-31-2006, 03:07 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •