I have finished a Cnc router and am part way through a laser. All the guides are complete and am read to fit stepper motor and drive belts.,.Table size is 350* 500mm. What size Nema motor would be suitable. Also what belt width and pulley gearing..
Results 1 to 2 of 2
Threaded View
-
01-14-2022, 03:02 AM #1
- Join Date
- Jan 2022
- Posts
- 1
Stepper motors and timing gears and belts.
Reply With QuoteSimilar Threads
-
Looking for help trying to find 12 Spline Gears for my 1/4" Dual Shaft Stepper Motors
By AJsCK609 in forum Stepper Motors / DrivesReplies: 0Last Post: 03-23-2018, 10:05 PM -
Need Source - Timing Belts / Gears
By rich in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 09-07-2006, 03:14 PM -
Timing belts, gears, source? and questions?
By CuttersCov in forum DIY CNC Router Table MachinesReplies: 5Last Post: 03-22-2006, 01:07 PM -
Questions about timing belts & gears
By rc-cellar in forum Mechanical Calculations/Engineering DesignReplies: 1Last Post: 04-28-2005, 05:09 AM -
Timing belts, gears, and ratios
By samualt in forum DIY CNC Router Table MachinesReplies: 11Last Post: 12-20-2003, 02:09 AM
Tags for this Thread
Posting Permissions
