I have a Grizzly G0602 that I converted to CNC with BDTools ballscrews and kit. Was running in Mach3. Didnt do much with it and it sat in the corner for quite a few years. I decided to dust it off and get it going again. Heres what I'm in the process of doing.

1) Pathpilot Conversion - X and Z moving well, need to get the spindle going.
2) Spindle Encoder
3) Full enclosure build.
4) 3PH Motor / VFD swap
5) 5C collet

Heres a shot of where it stands. I'll keep the build log going.

Scott....