Biggest bonehead mistake in a long time. I was moving a PCNC 440 on a stand yesterday with a pallet jack. The machine had a Microarc, tool changer and vise all mounted.

Had a slight decline and moved over a tiny bump and it was just enough to cause the top-heavy 440 to tip right over. It fell flat on the front of the machine with the chip pan and front of the enclosure bearing the brunt of the fall. Chip pan and enclosure is all bent - that can be fixed. But I’m more worried about what the impact might have done to the machine.

What would you be checking first and what test last should I run when it’s back under power?