584,854 active members*
4,347 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > EdingCNC > Eding CNC720 and UIO-10 in Emco F3 conversion
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2012
    Posts
    143

    Eding CNC720 and UIO-10 in Emco F3 conversion

    I'm doing a conversion of an Emco F3 mill to CNC and have chosen the Eding CNC720 with an UIO-10 expansion board as the controller. You can follow progress over on the Emco Mills sub forum.

  2. #2
    Join Date
    Mar 2012
    Posts
    143

    Re: Eding CNC720 and UIO-10 in Emco F3 conversion

    I'm trying to figure out how to wire the driver alarm output from the 3 (x y z) drivers into the DRVALM input.https://www.cnczone.com/forums/stepp...ml#post2491938

    Any help would be appreciated. Thanks

Similar Threads

  1. Emco F1 conversion
    By slow_rider in forum Benchtop Machines
    Replies: 8
    Last Post: 11-27-2022, 03:38 AM
  2. EMCO FB-2 CNC Conversion- HELP
    By diabolik in forum EMCO Mills
    Replies: 1
    Last Post: 07-26-2018, 04:07 PM
  3. EMCO PC 50 Mill Conversion
    By blizbiggy in forum EMCO Mills
    Replies: 4
    Last Post: 06-11-2012, 06:47 AM
  4. Emco PC 5 Conversion
    By Nigel_B in forum Australia, New Zealand Club House
    Replies: 14
    Last Post: 10-23-2006, 10:38 AM
  5. Emco f1 mill conversion help
    By no1uno in forum Benchtop Machines
    Replies: 5
    Last Post: 11-10-2004, 09:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •