[testpilot]

Hello guys.
I use it about 3 months but I can't find solution how to get value from proximity sensor in SpindleS true
It's not a problem to switch on in config-port and pins-Input Signals-index-port 3 pin 1 (any 1-4) and index LED in diagnostics reads signal from sensor but no True PRM value.
Does someone found way to make thread with RNR motion board?

Attachment 474954

[joeavaerage]

Hi,
the only thing to recommend an RnR board it that its cheap.....and works sometimes/mostly.

If you want a better result buy a US or European made motion controller.

Craig