[PhantomGhost]

What is the proper name for THIS?




I am looking for a fixture that raises the workpiece vertically in the Z axis. I have seen these fixtures, but do not know the proper term for it.

[peteeng]

Hi Phantom - Its called a fixture, a jig, a bolster. Many names. Peter

[PhantomGhost]

I was looking for the proper name for this, not the general name. Specifically, a fixture that is significantly raised in height for 5 axis machining.

[peteeng]

I think its proper name is "Steve" Peter

[machinehop5]

...its called a Riser.
https://www.ebay.com/sch/11804/i.htm...Desc=0&_sop=10

[PhantomGhost]

...its called a Riser.
https://www.ebay.com/sch/11804/i.htm...Desc=0&_sop=10

BINGO! Thanks!!!!