585,712 active members*
4,258 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Dolphin CAD/CAM > Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle

Thread: Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle

Results 1 to 1 of 1
  1. 01-26-2022, 12:08 AM #1
    gta18
    gta18 is online now Registered
    Join Date
    Oct 2013
    Posts
    10

    Heidenhain TNC145 Fusion 360 Post, Incorrect End of Circle

    Hi,

    Trying out post processing in Fusion360 for my Bridgeport R2C3 with TNC145 controller. I drew up an Octagon as a contour test.

    Fusion360 spits out a gcode with c and cc code. And after uploading and trying to run it on my machine, it gives me an Incorrect End of circle error.

    I'm attaching my post processor, f360 dwg file and the gcode result.

    Can someone familiar with this setup please advise? I really don't want to rip out the electronics and upgrade it as of yet.

    https://a360.co/3IFHtmy

    Thank you.
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Heidenhain iTNC530, solution for CIRCLE END POSITION INCORRECT error
    By ncmatic in forum Uncategorised CAM Discussion
    Replies: 1
    Last Post: 01-18-2022, 04:19 PM
  2. Fusion 360/Mach 3 Gcode program end code help
    By dkp_design in forum Autodesk
    Replies: 7
    Last Post: 07-04-2020, 02:18 AM
  3. circle end pos. incorrect
    By knowlesy in forum G-Code Programing
    Replies: 4
    Last Post: 06-21-2015, 10:58 AM
  4. circle end point incorrect/ machine parameter
    By ANI-MAT in forum HEIDENHAIN -> TNC
    Replies: 1
    Last Post: 12-21-2011, 12:53 PM
  5. CIRCLE END POSITION INCORRECT
    By brad white in forum Dolphin CAD/CAM
    Replies: 6
    Last Post: 12-01-2009, 09:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules