[moto-guy93]

Hi all

does anyone know what software i should use to transfer programs to the machine via RS232 port?


any links to it would be great thanks !


easy link seems to be the one does anyone know where i can get it?

[dune1982]

Hi,
you can also try FILOU-MX2

[moto-guy93]

Great ill give it a go , do you have a safe download link ?

[bptcontrols]

Moto,

Exit EZPath program by select 'Utils'. It should switch to a screen that gives several comm options: Z-modem, text, EZlink. Need one of these programs to talk to the EZPath. Good luck finding them, and they only run on MS-DOS 6.22.

Regardless, RS-232 comm may or may not work on EZPath, it depends upon the software version and the pc-motherboard. if the motherboard was upgraded/replaced from the original it probably will not work, the software is incompatible.

FYI, I worked in Bridgeport / CMS in early 90s and wrote the communication utility software. After '96 it was never updated by CMS to be compatible with pc-motherboard replacements.


Bart