585,599 active members*
3,593 visitors online*
Register for free
Login

Thread: Old Isel and Solectro P3

Results 1 to 2 of 2
  1. 02-25-2022, 01:27 PM #1
    pekezu
    pekezu is offline Registered
    Join Date
    Feb 2018
    Posts
    3

    Old Isel and Solectro P3

    I have an old Isel (1500mm x 1400mm table) with stepper motors. It is (was) controlled by Solectro P3. I have it's original cables and I can connect the P3 to my computer with Galaad. BUT I can't get steppers running. They are locked, when P3 has power on and relesed when powered off. I believe there is something wrong with the reference 24v wire connection in the motor side, but I can't figure out how it should be. Any information would be great!
    Reply With Quote Reply With Quote
  2. 03-22-2022, 08:15 PM #2
    pekezu
    pekezu is offline Registered
    Join Date
    Feb 2018
    Posts
    3

    Re: Old Isel and Solectro P3 (JBG-elektronik SML-33)

    This seems to be same as JBG-elektronik SML-33.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. grbl-Upgrade for Techno Isel Davinci/ISEL EP1090
    By Sebastian-Schuetz in forum Techno CNC
    Replies: 0
    Last Post: 09-12-2019, 07:06 AM
  2. Wanted - manual for ISEL PC CV-3 servocontroller/ ISEL GFV flatbed
    By rc-worcs in forum Machinery Manuals / Brochures
    Replies: 3
    Last Post: 11-17-2017, 10:09 PM
  3. Techno / Isel / Tecno Isel confusion
    By H.I.P. in forum Techno CNC
    Replies: 7
    Last Post: 03-24-2014, 04:02 PM
  4. New Controller for Isel
    By kngot in forum Controller & Computer Solutions
    Replies: 0
    Last Post: 09-11-2012, 02:26 PM
  5. Techno Isel
    By cuemaker1 in forum Commercial CNC Wood Routers
    Replies: 5
    Last Post: 12-15-2007, 01:51 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules