Does anyone have one of these that works?
The one on the Mastercam website post G-code inverted/corrupted.

e.g. - drilling canned cycle:

N10 G87 X2.047 Y.94 Z1.4627 Z.15 Z.1 F3.3
N20 X5.922
N30 G80
N40 G75 G90
N50 G0 X10. Y10. T3 M06

Machine makes the drilling motion with the previous tool then changes to the drill (T3)
No coolant controls get posted (M8/M9)
the X10. Y10. puts set the "out of limits" alarms

Any assistance or guidance would be appreciated.